💧Precautions for the Use of Faucets

💧Precautions for the Use of Faucets

The appearance of the faucet brings great convenience to our daily water use. It is a product that is frequently used. We need to pay attention to some problems in our daily use in order to prolong its service life. Next, let’s take a look at the attention matter.

1.During installation, all kinds of impurities in the pipeline should be completely removed to avoid damage to the valve core, blockage and leakage and at the same time pay attention to cleaning the surface of other building material residues.

2.For any kind of faucet, do not use too much force when opening and closing, just twist or turn it gently, especially do not use the handle as a handrail to support it to avoid damage. If the water outlet has a mesh cover, the product should be disassembled and cleaned after a period of use to remove impurities.

3.The metal hose of the bathtub faucet or the shower faucet should be kept in a natural stretch at all times. Do not coil the hose on the faucet when not in use. At the same time, pay attention to the interface between the hose and the valve body not to form a dead angle to avoid breaking or damaging the hose.

4.The faucet that has not been used for a long time will sometimes leak water, the handle is loose, the connection port is loose, etc. So it should be checked and repaired regularly.

Back to blog

❓Common problem

1. How to basin opening?
Suggestions to the real quasi out basin's position as structural components of tap water pipes, drainage device and the cabinet in the table. Set aside an appropriate gap. It is suggested that the distance between the center line of the faucet and the decoration to finish the wall is 51mm

2. Faucet water is small how to do?
First check the other faucets in the home are all this problem, like small water may be small water pressure, need to ask the property to help solve the water pressure problem. If there is no problem of water pressure, check the blockage of the outlet of the faucet. First remove the filter screen for cleaning. Maybe impurities in the water filter up the filter net, or further check whether the filter net cover is blocked or not.

3. The faucet does not produce hot water how to solve?
1, check the hot water inlet pipe valve is open;
2, check whether the home water heater is open or not.
3, remove the filter net to clean, maybe the impurity in the water causes the water pressure to be too small, which may cause the water heater to not open.

4. How to clean up the faucet's sprinkler blockage?
It is not recommended that the user disassemble the sprinkler for cleaning without authorization because it may cause the damage of the sprinkler. In the case of damage to shower, shower water outlet holes for sewing available quasi lightly dredge; such as congestion is serious, please contact customer service to assist or contact local suppliers to buy shower.

📃Disclaimer

💧(1) failure or damage caused by the use of, misuse or violation of common sense in accordance with the requirements of the instructions.

💧(2) failure and damage caused by force majeure factors such as fire, earthquake, flood, freezing and freezing.

💧(3) failure and damage caused by failure of maintenance and cleanliness.

💧(4) failure or damage caused by careless handling, intentional modification or failure to meet the requirements of repair.

💧(5) the failure and damage caused by the sediment in the water supply system or the inclusion in the water supply system.

💧(6) the failure and damage caused by the failure to meet the requirements of the installation or the harsh environment.

 

⚠Precautions

Precautions for installation of water faucet
💧1, Take out the faucet, check if all the accessories are complete, be sure to remove the dirt around the installation hole and in the water supply pipeline before installation to ensure that there are no impurities in the inlet pipeline. In order to protect the faucet surface from being scratched, it is recommended to wear gloves when installing.
💧2, Take out the rubber washer, the washer is used to relieve the pressure of the faucet metal surface in contact with the ceramic basin and protect the ceramic basin, then insert an inlet pipe and screw it tightly.
💧3, Put the threaded connector through the first inlet hose, and then put the second inlet hose inlet end through the threaded connector.
💧4, Screw the second water inlet hose into the water inlet port, pay attention to the correct direction, balanced force, and then screw the threaded connector.
💧5, Put the two water inlet hoses through the white rubber gasket. Put on the lock nut to fix the faucet. Then just tighten the sleeve. Lock the two inlet hoses and the angle valve interface separately, do not use pipe wrench full force plate twist to prevent deformation or even twist off. Pay attention to the connection of tropical and cold water. Use the other end of the inlet pipe to connect the outlet angle valve.

📞Contact Us

☎ TEL:

Fixed telephone : 86+750-2736699
Mobile phone : 13794251888  /   15015018000
FAX : 86+750-2736699

📍ADD:

Building 5, No. 132-146, Jiaxing South Road, JiaxingIndustrial Zone, Shuikou Town, Kaiping City

✉ E-MAIL:

jmdr@jmdongrui.com