⚠Precautions

Precautions for installation of water faucet
💧1, Take out the faucet, check if all the accessories are complete, be sure to remove the dirt around the installation hole and in the water supply pipeline before installation to ensure that there are no impurities in the inlet pipeline. In order to protect the faucet surface from being scratched, it is recommended to wear gloves when installing.
💧2, Take out the rubber washer, the washer is used to relieve the pressure of the faucet metal surface in contact with the ceramic basin and protect the ceramic basin, then insert an inlet pipe and screw it tightly.
💧3, Put the threaded connector through the first inlet hose, and then put the second inlet hose inlet end through the threaded connector.
💧4, Screw the second water inlet hose into the water inlet port, pay attention to the correct direction, balanced force, and then screw the threaded connector.
💧5, Put the two water inlet hoses through the white rubber gasket. Put on the lock nut to fix the faucet. Then just tighten the sleeve. Lock the two inlet hoses and the angle valve interface separately, do not use pipe wrench full force plate twist to prevent deformation or even twist off. Pay attention to the connection of tropical and cold water. Use the other end of the inlet pipe to connect the outlet angle valve.