For modern urbanite, home environment satisfaction is deteriorating, so it is necessary to master some home product care knowledge and maintenance methods.
Several Notices for the use of faucets.
- When we switch the faucet, please overexert and just need to rotate it gently. Even for the traditional type of faucet, which also does not require a lot of force to twist . Particularly, do not use the handle as a handrail for support or usage.
- The flexible metal tube of bathtub faucet’s shower head should stay in a natural stretch. Do not coil it around the faucet when not in use. Meanwhile, whether used or not used, please not form a dead angle between the joint of the hosepipe and the valve body, so as not to break or damage the hosepipe.
- In the case of hydraulic pressure not less than 0.02MPa (ie 0.2kgf/cm2), if wefound that the water output is reduced, or if the water heater turns off over a period of time. Then you can gently unscrew the screen cover at the water outlet of the faucet to remove impurities, and generally can be restored as before.
- Experienced and qualified professionals should be invited to carry out the construction and installation. When installing, the faucet should try not to bump with hard objects, do not leave cement, glue, etc. on the surface, so as not to damage the surface plating gloss. What’s more,before install the faucet, remove the debris in the pipe first.
- When the normal temperature is lower than zero degrees Celsius, if it is found that the faucet handle feels abnormal, it is necessary to use tropicalwater to iron the bathroom product until it feels normal so that the use after operation will not affect the service life of the faucet valve.
- Water contains a trace amount of carbonic acid compound, which is easy to form scale and corrode its surface after evaporation on the metal surface. This will affect the service life of the faucet, so the use of soft cotton cloth or sponge often scrub the surface of the faucet is very necessary. Do not use metal cleaning balls or scouring pads to clean, which is easy to scratch the faucet surface. Also,do not hit the surface of its spout with a hard object.
- Dripping will occur after the new faucet is closed, which is caused by the residual water in the inner cavity after the faucet is closed, which is a normal. However, if it is tickingfor a long time, then maybe something wrong with the faucet itself, indicating that the product has quality problems.
E-MAIL: